86-535-8520126
No. 1-201, Bldg. 42, Songlan Village, Donglai Street, Longkou, Shandong, China (Mainland)
Eps Concrete Sandwich Panel Machine
Capacity of the concrete compound wall machine:
75mm (thick) | 50pcs/mould |
100mm (thick) | 40pcs/mould |
150mm (thick) | 30pcs/mould |
The panel size | 2440x610x75/90/100/120/150mm (length x width x thickness) |
Face panel | calcium silicate board or fiber cement board |
Inner material | cement, sand, eps, additive |
1. The grids of the mould is galvanized so it is wear-resistant and of higher quality.
2. The machine is remote controlled. So it can move automatically without pulling machine. In this way, the machine is safer to use and more energy-saving.
3. The mixer of the production line is specially designed. It is larger capacity. (3m3). Two cycles of mixing is enough for filling one mould.
4. The feeding and measuring of materials are all automatic. It is much easier to use and can guarantee the accuracy of the formula so that the panels have a very good quality.
Q1: What's the capacity of the production line?
|
A1: The capacity depends on the quantity of the panel moulding machine and your panel thickness. If the panel thickness you want to make is 100mm, then one panel moulding machine can make 40 pieces of panels. If the panel thickness is 150mm, then one panel moulding machine can make 30 pieces of panels.
|
Q2: Can I make 3000mm-long panels?
|
A2: If you make wall panels with face panel (calcium silicate board or fiber cement board), the normal panel size is 2440mmx610mm because the face panel size is like this. However, if you don't use face panel, the panel size can be 3000mm long.
|
Q3: Can I make 1220mm-wide panels?
|
A3: Yes, you can, but the panel is difficult to install on the construction site and the accuracy of panel size is not as good as 610mm panels.
|
Q4: How long is the curing time?
|
A4: It is around 5-6 hours in normal temperature. |
Back Home!
