86-535-8520126
No. 1-201, Bldg. 42, Songlan Village, Donglai Street, Longkou, Shandong, China (Mainland)
Concrete Hollow Core Slab Machine. Slide Mould Machine
1. High Capacity
This new-style stainless steel machine can make 14 pieces of panels.
2. Lower the cost of production
We use stainless steel for the mould instead of traditional steel.
3. The product quality is better
Panels made by this kind of machine have better quality than other kinds.
4. Special Designs
♦The mixer is specially designed for the production line. It has large capacity and can fill in the moulds very fast and easily.
♦The male and female grooves are disgned well and very easy to use and can form good shape of the panels.
♦ Special design of the side mould.
5. According to The Customers' Requirement
performance index
Item | Property index | Test Result | Monomial conclusion |
Surface density | ≤ 90kg/ sq.m. | 37kg/ sq .m | qualified |
Flexual-resistance load | ≥ 1.5 | ≥1.9 | qualified |
Impact performance | To bear 30kg standard sandbag ,the fall is 0.5m,the swing attact is 5 time | Attact 10 times is no flaw 12time | qualified |
Single point hanging strength
| To bear1000N handing action | The face don't have disrepair and flaw | qualified |
Dry shrinkage | ≤ 0.6mm/m | 0.45mm/m | qualified |
Noise insulation factor | ≥ 35bB | 40dB | qualified |
Q1: How long is the curing time?
A1: If you use normal portland cement, the curing time is around 5 hours. If you use Mgo, the curing time is only 2 hours.
Q2: How many labors are needed for the production line?
A2: Five labors are enough.
Q3: Can the machine make other kinds of panels?
A3: Yes, it can. It can make sandwich panels, too. Please see the following photo for reference.We can also design the right machine to make panels according to customers' requirement.
